Tooth discoloration induced by endodontic sealers and cervical limit: 1-year in vitro evaluation.

This laboratory study aimed to evaluate the influence of endodontic sealer and cervical limit of root filling on the discoloration of root canal treated teeth. Bovine incisors were randomly distributed into six experimental groups and control (n=21/group), according to the endodontic sealer used [AH Plus (AP); MTA Fillapex (MF) and Sealer Plus BC (SPB)] and the cervical limit of root filling [dental cervix (DC) or 2 mm in apical direction (2mm-AD)]. Tooth discoloration (ΔE) was evaluated by a digital spectrophotometer using the CIED2000 method. Color assessments were performed immediately before (baseline), 1 week, 1, 3, 6 months, and 1 year after obturation. Data were analyzed by ANOVA and Tukey's post-hoc tests (α=5%). Teeth filled with the three sealers showed perceptible tooth discoloration (ΔE≥2.7) in 1 week, maintaining similar values over time. There was a significant difference between MF and SPB sealers in the 2mm-AD groups. In addition, 2mm-AD groups promoted significantly lower discoloration than DC groups for AH (3 months) and SPB (1 and 3 months) sealer,s. Teeth filled with AP, MF, and SPB sealers displayed discoloration from 1 week to one year, with differences between MF and SPB sealers. A cervical limit of filling material at 2 mm from the dental cervix seems more advisable, promoting lower crown discoloration.

Inhibition of Silver Diamine Fluoride-induced Tooth Discoloration by Using Natural Antioxidant: In Vitro Study.

AIM: Silver diamine fluoride (SDF) is a well-known caries preventive aid capable of arresting carious lesions and preventing secondary caries formation. Despite having the caries prevention potential, the clinical use of SDF is limited due to the tooth discoloration caused by SDF. The objective of this study was to evaluate the efficiency of natural antioxidants to inhibit SDF-induced tooth discoloration. MATERIALS AND METHODS: A total of 32 bovine teeth were polished to create a 6 mm circular window on the middle 1/3 (for enamel) or on the cervical 1/3 (for dentin) of the labial surface. Specimens were treated either with SDF alone or SDF followed by ascorbic acid (AA)/alpha lipoic acid (ALA)/7th generation bonding materials. The color parameters Lightness (L*), Chroma (C*), and Hue (H*) of the tooth window were measured at pretreatment, 1-hour, 1-week, and 1-month posttreatment using a digital color chromometer. RESULTS: Repeated measure ANOVA showed a significant tooth color alteration at 1-hour posttreatment. The L* and H* values dropped and C* value elevated significantly in 1-hour posttreatment measurement. All experimental groups showed significant tooth color alteration after treatment (p < 0.05) and were unable to reverse the discoloration even after 1-month period except the ALA group which did not show any significant (p > 0.05) color alteration compared with the pretreatment value. CONCLUSIONS: Within the limitation of the in vitro model and according to the results of this study, it can be concluded that ALA has the potential to prevent SDF-induced tooth discoloration; however, AA was unable to prevent the discoloration. CLINICAL SIGNIFICANCE: SDF induces discoloration of enamel and dentin can be reversed by applying Alpha lipoic acid immediacy after SDF application.

Effect of enamel surface coating on staining capability due to iron containing supplements on primary teeth: An in vitro study.

Background: Iron supplements prescribed to anemic children may results in teeth staining. Possible methods for preventing staining of primary teeth following exposure to iron supplements are need of an hour. Aim: This study was conducted with the aim to assess effect of enamel surface coating on staining capability of iron containing supplements in primary teeth. Settings and Design: This is an in vitro Experimental study. Methods: Hundred and forty-four primary incisors with intact crowns were sequentially numbered and randomly divided into four main groups of 36 samples receiving different enamel surface coating such as no surface coating, MI fluoride varnish™, GC G-coat Plus™ and GC-Equia®-forte-coat. Each group was subdivided into two groups, namely A (sound teeth) and B (artificially demineralized teeth). All the samples were immersed in 250 ml artificial saliva containing 10 ml of iron supplement to make the iron concentration 100 mg. The shade of the teeth was measured at baseline and at 90 days, using VITA Easy shade® V digital spectrophotometer. The data was statistically analyzed using the Kruskal-Wallis test and Mann-Whitney U test. Descriptive and inferential statistical analyses was made via SPSS 23. Results: Overall color change was found to be significantly less at the end of 90th day in sound samples when GC-Equia®-forte-coat was used as an enamel surface coating with pvalue of 0.017. In demineralized samples the overall color change was least at the end of 90th day when MI Varnish™ used as an enamel surface coating with P = 0.042. Conclusions: GC-Equia®-forte-coat, MI Varnish™ and GC-G-coat-plus™ can be used as a preventive or a precautionary measure to minimizes the staining of teeth. The amount of color change at the end of 90 days with GC-Equia®-forte-coat was least followed by MI varnish™, GC G coat Plus™ and control group.

Effects of aerosols from heated tobacco products with flavors on the discoloration of bovine tooth enamel.

OBJECTIVES: This in vitro study assessed the potential of tooth discoloration by aerosols generated from three heated tobacco products (HTPs) with different specifications: in-direct heating tobacco system platform 1.0a (IT1.0a), in-direct heating tobacco system platform 2.0a (IT2.0a), and direct heating tobacco system platform 3.0a (DT3.0a). In addition, three flavor types (regular, menthol, and berry menthol) were selected for each HTP to characterize the effect of flavor types on tooth discoloration. MATERIAL AND METHODS: Six bovine tooth samples were exposed directly to aerosols generated from one pack of each HTP: 350 puffs for IT1.0a, 325 puffs for IT2.0a, and 220 puffs for DT3.0a. Six bovine tooth samples were also exposed to air (350 puffs) and smoke generated from one pack of cigarettes (160 puffs) as negative and positive controls, respectively. The color of each tooth sample was measured before and after exposure. The overall color changes were assessed using overall color differences (ΔE) calculated according to the Commission International de I'Eclairage color system. A one-way analysis of variance followed by Tukey's post hoc test was used to compare ΔE among bovine tooth samples exposed to air, cigarette smoke, and aerosols generated from each HTP. RESULTS: ΔE values for tooth samples exposed to air and aerosols generated from the three HTPs (IT1.0a, IT2.0a, and DT3.0a) were significantly lower than ΔE value for tooth samples exposed to cigarette smoke. ΔE values obtained with DT3.0a were significantly higher than those obtained with air-exposed control samples. However, ΔE values obtained with IT1.0a and IT2.0a were not significantly different from that obtained with air-exposed control samples. No HTPs showed significant differences in ΔE values among the three flavor types. CONCLUSIONS: This study showed that HTP aerosols reduce tooth discoloration potential compared with cigarette smoke, regardless of flavor types, and the tooth discoloration potential of the product may depend on product specifications.

The Effect of Calcium Silicate-Based Materials on Tooth Discoloration and Evaluation of Color Change After Bleaching Treatment: A Spectrophotometric Study.

PURPOSE: To evaluate tooth discoloration after the use of calcium silicate-based materials and to examine the effect of internal bleaching on tooth discoloration. MATERIALS AND METHODS: The specimens were randomly divided into two experimental groups (n = 45) and a control group (n = 6). Cavities were filled with ProRoot MTA (Dentsply) in Group 1 and Biodentine (Septodont) in Group 2. Color measurements were taken with a spectrophotometer before and after the application of materials at 1 week and then at 13, and 6 months. After 6 months, Groups 1 and 2 were divided into three subgroups according to internal bleaching techniques. All color change ratios and lightness differences were calculated using the CIE L*a*b* system. Data were analyzed using repeated ANOVA and the Kruskal-Wallis test (P = .05). RESULTS: There were statistically significant differences between Groups 1 and 2 at all time intervals (P < .05). Group 1 showed more discoloration than Group 2 (P < .05). There were no significant differences between the bleaching agents (P > .05). Additionally, specimens in both groups became lighter than their initial color (P < .05). CONCLUSION: Teeth treated with ProRoot MTA exhibited darkening at 1 week that increased over time, whereas those treated with Biodentine maintained the lightness for 6 months.

Evaluation of the effectiveness of different treatment approaches in preventing coronal discoloration caused by regenerative endodontic treatment.

OBJECTIVES: This study aimed to evaluate the effectiveness of Teethmate desensitizer, a dentin bonding agent (DBA), Nd:YAG laser, and Er:YAG laser, which provides dentin tubule occlusion in the pulp chamber with different mechanisms, in preventing tooth discoloration due to regenerative endodontic treatment. MATERIALS AND METHODS: One hundred five extracted maxillary human incisors with single roots and single canals were included in the study. The apical third of each tooth was resected below the enamel-cementum junction (CEJ) to obtain a standard root length as 10 ± 1 mm. Root canal preparation was performed using the ProTaper Next files up to X5. Root canals were prepared with Gates Glidden (# 2-4) burs to simulate the immature root apex and an apical diameter of 1.1 ± 0.1 mm was obtained. The teeth were randomly divided into 7 groups (n = 15): DBA, Teethmate, Nd:YAG, Er:YAG, Biodentine, Blood, and Negative Control. Relevant dentin tubule occlusion methods were applied to DBA, Teethmate, Nd:YAG, and Er:YAG groups. Following dentin tubule occlusion procedures, Biodentine was placed on the blood clot after filling the root canals with blood up to 4 mm below the CEJ. No dentin tubule occlusion procedure was applied for Blood and Biodentine groups. Color measurement was performed with the spectrophotometer Vita Easyshade Advance before treatment, immediately after treatment, and at days 7, 30, and 90. Data were converted to L*a*b color values of Commission International de I'Eclairage (CIE L*a*b) and ΔE values were calculated. Two-way ANOVA and post hoc Tukey test (p = 0.05) were performed for statistical analysis. RESULTS: A clinically detectable color change was observed in all groups except for the negative control (ΔE ≥ 3,3). It was observed that Biodentine used alone has a potential for discoloration. It was determined that as the contact time with blood increased, tooth discoloration increased. However, no significant difference was found between dentin tubule occlusion methods in preventing color change (p > 0.05). CONCLUSIONS: It was determined that no dentin tubule occlusion method could 100% prevent discoloration caused by RET. CLINICAL RELEVANCE: DBA and Teethmate, which do not have a significant difference in terms of preventing color change, are considered to be suitable for dentin tubule occlusion due to their ease of application and low cost compared to Nd:YAG laser and Er:YAG laser.

Coronal discoloration induced by calcium silicate-based cements used in full pulpotomy in mature permanent molars: a randomized clinical trial.

OBJECTIVES: This study aimed to randomly compare in vivo coronal discoloration at 6 and 12 months after full pulpotomy in mature permanent molars using MTA, Biodentine, and TotalFill and to investigate the effect of variables such as remaining buccal wall thickness and time to achieve hemostasis. MATERIALS AND METHODS: One hundred eight teeth that met the inclusion criteria received full pulpotomy and were randomly divided into 3 groups via a block randomization technique according to the calcium silicate cement (CSC): ProRoot WMTA, TotalFill, or Biodentine. Assessment of tooth color was carried out using a spectrophotometric device (VITA Easyshade Compact) after composite placement (T0), at 6- and 12-month follow-up. Buccal wall thickness and time to hemostasis were recorded. The primary outcome measure (color change ΔE) was calculated, and the results were analyzed by three-way ANOVA and crosstabulations in relation to material type and effect of variables. RESULTS: Four cases were excluded after pulpotomy failure; 81 teeth were evaluated at 6 months and 95 teeth at 12 months. All CSCs caused tooth discoloration (defined as ΔE > 3.7); MTA significantly caused the highest color change at 6- and 12-month follow-up (76% (19/25) and 87.5% (28/32), respectively) compared to Biodentine (41% (9/22), 48% (13/27)) and TotalFill (44% (15/34), 53% (19/53)) (p = 0.022, p = 0.002), while no significant difference was found between the Biodentine and TotalFill groups (p = 0.813, p = 0.8). Buccal wall thickness (above or below 2.7 mm) had a significant effect on the degree of discoloration (p = 0.004). CONCLUSIONS: The 3 CSCs caused tooth discoloration based on the threshold of ΔE > 3; the remaining buccal wall thickness was a significant factor. The use of Biodentine and TotalFill instead of MTA is encouraged to minimize discoloration. CLINICAL RELEVANCE: While experimental studies report coronal discoloration after CSCs use, clinical data is lacking. This study assessed discoloration using a spectrophotometric device. The use of materials with lower discoloration potential in pulpotomy is encouraged. TRIAL REGISTRATION: The study was registered with clinical trial registration number: NCT04346849 on 14.4.2020.

Evaluation of the effect of pediatric drugs and an oral rinse on primary teeth discoloration.

BACKGROUND: Changes in the color of the teeth are a common dental finding associated with clinical and esthetic problems. Especially, the discoloration of primary teeth can cause parental concern and have a negative effect on social interactions between preschool children. OBJECTIVES: The aim of the study was to evaluate the effect of pediatric drugs and an oral rinse on the discoloration of primary teeth. MATERIAL AND METHODS: Similar to medication intake recommendations, 7 primary teeth in each group were immersed for 1 min in one of 11 different solutions at 8-hour intervals for 1 week. The color values were obtained using a spectrophotometer (VITA EasyShade®) at baseline and after 1 week. The color change (ΔE*) values were calculated according to the CIELab system. The statistical analysis was conducted using the one-way analysis of variance (ANOVA) and Tukey's post hoc tests at a p-value <0.05. RESULTS: When comparing values L*, a* and b* at baseline and day 7, a statistically significant difference was found in the a* value for the teeth immersed in pseudoephedrine (p = 0.012). There were also statistically significant differences with regard to color change at day 7 (ΔE*7) between the pseudoephedrine and chlorhexidine as well as pseudoephedrine and control groups (p = 0.034 and p = 0.030, respectively). CONCLUSIONS: The ΔE*7 value for pseudoephedrine was 3.7 after 1 week, indicating that it may have the potential to cause significant tooth discoloration when used for a long period. Clinicians and children's families should be aware of the fact that some pediatric drugs can cause tooth discoloration.

Various Aspects Involved in the Study of Tooth Bleaching Procedure: A Questionnaire-Based Study.

A beautiful smile is an important feature when it comes to a pleasant appearance of the face, and one of the most common situations that drive patients to book a dental appointment is tooth discoloration. Tooth bleaching is the treatment of choice for extrinsic tooth discoloration, as it is a cheap, fast, and minimally invasive procedure. This study aimed to provide comparative information on the perceptions of both patients and dentists regarding different whitening methods and on the factors involved in people's willingness to recommend and use a bleaching procedure. In addition to this, this study evaluated the degree of satisfaction in relation to the bleaching methods and materials used; it also evaluated the following: negative side effects, economic characteristics and the patients' perceptions of the aesthetic appearance of their dental arches, especially tooth color. The subjects that participated in the present study were selected based on their background and were then divided into two categories. The first group consisted of 120 patients who had received tooth-bleaching treatments in dental clinics during the study and the second group consisted of 127 dentists. A conventional sampling method was used. The study aimed to define a relationship between multiple aspects of the tooth-bleaching procedure, including the patients' desires and their general knowledge of this procedure. Tooth color and the way it changes is a very important factor that motivates patients to come to the dentist for whitening procedures. Patients showed the highest levels of satisfaction with the results of in-office bleaching procedures. In the group consisting of dentists, satisfaction levels were higher for the procedure of home bleaching supervised by a dentist. Factors influencing the choice of bleaching materials are appreciated differently by dentists and patients. Furthermore, the rate of patients using OTC (over the counter) products was found to be high. Further research is needed to find more effective and safer alternatives to home tooth-bleaching procedures.

A critical analysis of research methods and experimental models to study tooth discolouration from endodontic materials.

As a range of materials used in endodontics may cause tooth discolouration, exploration of factors responsible for the darkening of the tooth crown or root is warranted. This narrative review paper discusses the range of technical factors that apply in laboratory studies that assess endodontic discolouration. As an example of how these factors operate, particular examples relating to discolouration caused by endodontic medicaments containing tetracycline antibiotics are used. Following the PRILE 2021 guideline approach, a summary of key variables to be addressed in the methodology for laboratory studies is presented, to inform future work.

Present status and future directions - Managing discoloured teeth.

Managing tooth discolouration involves a range of different protocols for clinicians and patients in order to achieve an aesthetic result. There is an increasing public awareness in the appearance of their teeth and management of tooth discolouration may be inter-disciplinary and involve both vital and nonvital teeth. Vital teeth can be easily treated with low concentration hydrogen peroxide products safely and effectively using an external approach and trays. For endodontically treated teeth, the walking bleach technique with hydrogen releasing peroxide products is popular. However, there is an association with external cervical root resorption with higher concentrations of hydrogen peroxide of 30%-35%. There are also regulatory considerations for the use of hydrogen peroxide in certain jurisdictions internationally. Prosthodontic treatments are more invasive and involve loss of tooth structure as well as a life cycle of further treatment in the future. This narrative review is based on searches on PubMed and the Cochrane library. Bleaching endodontically treated teeth can be considered a safe and effective protocol in the management of discoloured teeth. However, the association between bleaching and resorption remains unclear although there is likely to be a relation to prior trauma. It is prudent to avoid thermocatalytic approaches and to use a base/sealer to cover the root filling. An awareness expectations of patients and multidisciplinary treatment considerations is important in achieving the aesthetic result for the patient. It is likely that there will be an increasing demand for aesthetic whitening treatments. Bleaching of teeth has also become increasingly regulated although there are international differences in the use and concentration of bleaching agents.

Effect of Propolis mouthwash on clinical periodontal parameters in patients with gingivitis: A double-blinded randomized clinical trial.

OBJECTIVES: Periodontal diseases have multifactorial aetiology and are primarily caused by pathogenic bacteria. Using antibacterial mouthwashes as an adjunct to mechanical plaque control can effectively improve the quality of oral hygiene maintenance at home. This study aimed to assess the clinical efficacy of a propolis-containing mouthwash in gingivitis treatment. METHODS: This clinical trial evaluated 32 patients with gingivitis in two groups (n=16). The intervention group received a mouthwash containing propolis extract while the control group received the same mouthwash without the propolis extract. The papillary bleeding index (PBI), plaque index (PI) and tooth discoloration were evaluated in each patient at baseline (before the intervention) and at 15 and 30 days, after treatment. To facilitate the follow-up evaluations, the measurements were recorded for the tooth with the most inflamed gingiva in each quadrant (n = 128). The two groups were compared using the Mann-Whitney test. RESULTS: The change in PI was 85.19 ± 51.6% in the propolis and 83.93 ± 36.1% in the placebo group with no significant difference between them (p = 0.91). The reduction in papillary bleeding index was significantly greater in the propolis group compared with the placebo group (p < 0.001). The change in tooth colour over time was significant in the placebo and insignificant in the propolis group (p = 0.14). CONCLUSIONS: Considering the current findings, it seems that propolis mouthwash can effectively decrease gingival inflammation and bleeding, without causing tooth discoloration or staining. Considering the limitations of this study such as small sample size (based on participants and also number of teeth included in the study), future studies are warranted on this topic.

Tooth discoloration induced by apical plugs with hydraulic calcium silicate-based cements in teeth with open apices-a 2-year in vitro study.

OBJECTIVES: To assess tooth discoloration induced by different hydraulic calcium silicate-based cements (HCSCs), including effects of blood and placement method. MATERIALS AND METHODS: Eighty bovine teeth cut to a length of 18 mm (crown 8 mm, root 10 mm) were randomly assigned to 10 groups (n = 8), receiving orthograde apical plug treatment (APT). Apical plugs were 4 mm in length and made of ProRoot MTA (Dentsply), Medcem MTA (Medcem), TotalFill BC RRM Fast Set Putty (Brasseler), or Medcem Medical Portland Cement (Medcem) plus bismuth oxide (Bi2O3) with and without bovine blood. Further, orthograde (with or without preoperative adhesive coronal dentin sealing) and retrograde APT were compared. Teeth were obturated with gutta-percha and sealer, sealed with composite and stored in distilled water. Tooth color was measured on apical plug, gutta-percha/sealer, and crown surface before treatment versus 24 h, 1, 3, 6, 12, and 24 months after treatment by spectrophotometry. Color difference (ΔE) values were calculated and analyzed by Shapiro-Wilk test, ANOVA with post hoc tests, Friedman test, t test, and post hoc tests with Bonferroni correction (α = .05). RESULTS: Tooth discoloration occurred in all groups with no significant differences between HCSCs (p > .05). After 24 months, color changes were prominent on roots but insignificant on crowns. Blood contamination induced a significantly decreased luminescence (p < .05). Blood had a stronger impact on tooth color than Bi2O3. No relevant effects of retrograde placement (p > .05) or preoperative dentin sealing (p > .05) were detected. CONCLUSIONS: Apical plugs of the tested HCSCs cause discoloration of bovine roots, but not discoloration of bovine tooth crowns within a 24-month period. CLINICAL RELEVANCE: APT should be performed carefully while avoiding direct contact with the coronal dentin, and in that case no aesthetic impairments occur.

Quantifying Coronal Permanent Tooth Discoloration Caused by Different Pulpotomy Materials.

INTRODUCTION: Bioceramic materials, gray and white mineral trioxide aggregate (GMTA, WMTA), have been shown to have high rates of success in various endodontic applications. A major drawback is their tendency to discolor teeth compared to Biodentine (BD), that has been claimed not to discolor teeth. The aim of this study was to compare tooth discoloration after applying different pulpotomy base materials (BD, GMTA and WMTA). STUDY DESIGN: Forty human incisors teeth were used in this study. Coronal access was achieved by a Tungsten Carbide drill, and the pulp chambers were accessed and chemo-mechanically debrided. Each material was placed in the pulp chamber, up to the cervical sectioning level. All specimens were incubated at 37°C and 100% humidity for three months and have been evaluated before the study and weekly. Color was assessed according to the CIE L*a*b* color space system. RESULTS: ΔE of all experimental groups (GMTA, WMTA and BD) were significantly different from the control group at all time points (P<0.05). Color changes in the GMTA and WMTA groups, had no statistically significant differences, but showed higher discoloration compared to BD group in the cervical part of the crown, since week 1 (P<0.05). WMTA group showed significant discoloration in the cervical part as of week 1 (P<0.05), and gradually increased over time (Figure 2). BD group showed no significantly discoloration over time. GMTA group showed the significant discoloration at week 1 and week 14 (P<0.05). CONCLUSIONS: both GMTA and WMTA pulpotomy materials may discolor tooth structure over time in an extracted permanent anterior tooth model. When choosing bioceramic pulpotomy material, BD may be preferable in esthetic area.

Spectrophotometric evaluation of coronal discoloration induced by bioceramic root canal filling materials / Evaluación espectrofotométrica de la decoloración coronal inducida por materiales biocerámicos de obturación del conducto radicular

The aim of this study is to evaluate the crown discoloration induced by bioceramic root canal filling materials (OrthoMTA and iRoot SP) compared to AH Plus. Material and Methods: Sixty intact mandibular single rooted premolars were sectioned 2 mm below the cemento-enamel junction, prepared, and randomly assigned into four groups according to the root filling materials: OrthoMTA, iRoot SP, AH Plus and unfilled. Results: Before placement of the materials in the pulp chamber and the coronal third of the root, the spectral reflectance lines of the crowns were recorded by a digital spectrophotometer at baseline, and after filling at 1 week and 1, 3 and 6 months and ∆Ε values were calculated. All materials used induced clinically perceptible crown discoloration (∆Ε>3.7) and no significant difference was detected between these materials (p>0.05). Regardless of the material, discoloration progressed significantly within the three months (p<0.05) however, at 6 months, the discoloration reduced for AH Plus and no further increase for bioceramic materials was detected. Conclusion: Bioceramic root filling materials tested induced clinically perceptible crown discoloration and their application in the esthetic zone should be performed with caution.

Objetivo: El objetivo de este estudio es evaluar la decoloración de la corona inducida por materiales biocerámicos de obturación del conducto radicular (OrthoMTA e iRoot SP) en comparación con AH Plus. Material y Métodos: Se seccionaron sesenta premolares mandibulares de raíz única intactos, 2 mm por debajo de la unión cemento-esmalte, se prepararon y se asignaron al azar en cuatro grupos de acuerdo con los materiales de obturación radicular: OrthoMTA, iRoot SP, AH Plus y sin relleno. Resultados:Antes de la colocación de los materiales en la cámara pulpar y el tercio coronal de la raíz, las líneas de reflectancia espectral de las coronas se registraron con un espectrofotómetro digital al inicio del estudio, y a la semana 1, así como a 1, 3 y 6 meses, y los valores ?? fueron calculados. Todos los materiales utilizados indujeron una decoloración de la corona clínicamente perceptible (??> 3,7) y no se detectaron diferencias significativas entre estos materiales (p> 0,05). Independientemente del material, la decoloración progresó significativamente dentro de los tres meses (p<0.05); sin embargo, a los 6 meses, la decoloración se redujo para AH Plus y no se detectó ningún aumento adicional para los materiales biocerámicos. Conclusiones: Los materiales biocerámicos de obturación radicular probados indujeron una decoloración de la corona clínicamente perceptible y su aplicación en la zona estética debe realizarse con precaución.

Tigecycline-Induced Tooth Discoloration in Children Younger than Eight Years.

Tetracycline may cause tooth discoloration when used in young children during tooth development. Whether tigecycline, a tetracycline derivative, has either a similar adverse event or not remains unclear. We assessed the discoloration of the permanent teeth of patients <8 years old after tigecycline exposure. These patients were identified through a retrospective chart review in a Chinese children's hospital. Those who had at least one erupted permanent tooth after tigecycline exposure were interviewed, examined, and photographed by an experienced pediatric dentist and independently assessed by another senior dentist to detect tetracycline-like tooth discoloration. We identified 101 patients who were exposed to tigecycline, 12 of whom were included. The mean daily dose of tigecycline was 2.3 mg/kg of body weight (standard deviation, 0.6), and the median duration was 12.5 days (interquartile range [IQR], 8.0 to 19.3). The median age of exposure was 5.2 years (IQR, 4.5 to 7.4), and the median age of dental examination was 9.1 years (IQR, 9.0 to 10.3). Two patients (16.7%) developed yellow discoloration: a girl having yellow discoloration with white-to-yellow opacities in the upper lateral incisors and lower incisors and a boy with a suspicious buccal yellow discoloration and enamel dysplasia in the second molars. The incidence and extent of tigecycline-associated dental adverse events remain unclear due to the small sample size and inadequate follow-up period.

The effect of different calcium silicate-based pulp capping materials on tooth discoloration: an in vitro study.

BACKGROUND: Variation in the composition of calcium silicate-based pulp capping materials could influence the discoloration potential of some of these materials, thus affecting the color and aesthetic appearance of the coronal tooth structure. Furthermore, contact with blood if hemostasis is not fully achieved may enhance this discoloration for some materials. Therefore the aim of this study was to evaluate in vitro the color change of coronal tooth structure after placing various calcium silicate-based materials in the pulp chamber in the presence or absence of blood. MEHTODS: Maxillary extracted premolars (n = 144) were sectioned and the crowns were separated from the roots. Pulp chambers were prepared to a standard size and then the tested materials (GMTA Angelus, ProRoot WMTA, Biodentine, TheraCal, and TotalFill) were placed with saline or with blood. Color change was assessed by spectrophotometry; prior to and after material placement at different time intervals of 24 h, 1 week, 1 month, 3 months, and 6 months. Color change (ΔE) values were calculated and statistically analyzed. RESULTS: In the saline groups, Biodentine caused the least color change, while GMTA and WMTA caused the highest color change which were significantly different from the others (p < 0.001), TotalFill and TheraCal caused moderate changes. Adding blood increased the ΔE overall the tested materials to various degrees. Biodentine was the most affected by the blood, while MTA groups were the least affected, followed by TotalFill and then TheraCal. The increase in ΔE was significant over time up to 3 months, after which the increase was not significant. CONCLUSIONS: Overall, WMTA and GMTA caused the most severe discoloration. In saline, Biodentine caused the least discoloration, but it was the most affected by the presence of blood, although it still caused the least discoloration similar to that observed with TotatFill. TheraCal caused moderate discoloration but more than that caused by Biodentine and TotalFill.

Bleaching: the initial treatment consideration for tetracycline-stained teeth.

Tray tooth bleaching involves the use of carbamide peroxide in a custom-fitted tray to bleach teeth. One of the most difficult stains to bleach is tetracycline. This paper will present several different patient situations of tetracycline-stained teeth being bleached and will discuss the benefits and limitations of bleaching tetracycline-stained teeth. By providing the patient with realistic potential outcomes of bleaching, as well as the preservation of tooth structure and cost-benefit ratio of bleaching compared to veneers or crowns, the chance for a successful acceptance of the outcome is better, even if the outcome is less than ideal. Bleaching before prosthodontic treatment can also provide a better outcome for subsequent veneers or crowns if that is possible, but sensitivity may preclude bleaching.

Does a diluted chlorhexidine-based orthodontic mouthwash cause less discoloration compared to chlorhexidine mouthwash in fixed orthodontic patients? A randomized controlled trial.

OBJECTIVE: Chlorhexidine gluconate is currently the most effective oral antimicrobial agent against microorganisms, but discoloration of the teeth prevents its long-term use and can reduce patient cooperation. In this study, the effect of chlorhexidine and a diluted chlorhexidine-based, fluoride, cetylpyridinium and vitamin added mouth rinse (Orthokin) on stain index in fixed orthodontic patients was compared. MATERIALS AND METHODS: This study was performed as a double blind randomized controlled trial on 50 patients undergoing fixed orthodontic treatment in the age group of 14-30 years. The patients were categorized as two groups of chlorhexidine and Orthokin mouth rinses and were asked to use mouthwash for eight weeks. Groups were matched according to colouring food consumption. Extrinsic staining index was assessed by modified Loben technique. Data was analysed by SPSS software. P value was set to be 0.05. RESULTS: In the chlorhexidine group, the stain extent index and overall stain index were increased significantly at 8 weeks (P<0.001 and P=0.002, respectively). However, the increase in stain intensity index was insignificant (P=0.07). In Orthokin group, the changes in stain extent, stain intensity and overall stain were insignificant (P=0.66, P=1.000, P=0.47, respectively). CONCLUSION: According to the results of the present study, chlorhexidine mouthwash causes more staining of teeth compared to Orthokin mouthwash. It seems that lower concentrations of chlorhexidine can be prescribed to orthodontic patients. Although these compounds are effective in sense of oral hygiene, they do not cause significant discoloration.